Video Setup - AEG DVD 4606 HC Bedienungsanleitung

3D PROCESS SETUP
Includes PRO LOGIC II, reverb mode setup.
PRO-LOGIC II CONFIG
Includes prologic II , mode setup.
Note: The selection is only possible if DOWNMIX 5.1CH
has been selected in the menu item.
PRO-LOGIC SETUP
Then follow the instructions in „DVD MENU SETUP" as
shown below.
PRO LOGIC is set to ON , OFF or AUTO.
MODE SETUP
Then follow the instructions in „DVD MENU SETUP" as
shown below.
Note: In the ProLogic setup it is also possible to adjust
other options such as PANORAMA, DIMENSION etc.
PANORAMA: ON activates the panorama effect and OFF
switches it off again.
DIMENSION: This option is used for changing the stereo
sound effect. This setting can be adjusted according to
the medium being played back.
CENTRE WIDTH: This option is used to change the
stereo sound effect of the central loudspeaker. This
setting can be adjusted according to the medium being
played back.
5....-05-DVD4606_GB 55
SYSTEM-SETUP (FUNCTION SETTINGS)
REVERB SETUP
In this menu you can select the preset sound characte-
ristics.

VIDEO SETUP

Includes component and TV mode setup.
COMPONENT SETUP
In this menu you can select the desired video output
format.
TV MODE
If you pre-select the P-SCAN function in the TV settings
of INTERLACE (PAL) television sets, the INTERLACE
television set will not transmit the pictures. The pictures
will disappear. (Note: You should only select P-SCAN
if you are sure that your receiving device also has Pro-
gressive Scan - see troubleshooting in the section „No
Picture".).
Please note that Progressive Scan can only be used via
the Y, Pb/Cb, Pr/Cr output. Depending on the projector
or television technology used, the quality of the pictures
may fl uctuate.
55
09.07.2004, 10:03:19 Uhr