AEG DVD 4606 HC Bedienungsanleitung Seite 50

AMP Volume up/down Adjustment
Press the FM MODE button repeatedly on the remote
control (in DVD playback mode). In the OSD of the TV
the following is displayed in the following order:
VOL_L+00dB
VOL_R+00dB
VOL_RS+00dB
VOL_LS+00dB
VOL_C+00dB
VOL_SW+00dB
Press the VOL+ or VOL- button on the remote control
to change the Volume value of L, R, LS, RS or C or SW
separately.
Zoom
With the help of the zoom function a picture can be en-
larged up to four times during normal playback or during
slow motion playback. Press the ZOOM button once to
double the size of the picture. Press again to enlarge the
picture to three times its normal size and a third time to
make it appear four times bigger than normal. In order
to return to normal playback, press the ZOOM button a
fourth time. If the button is pressed for a fourth time, the
picture is reduced in size by one half. Pressing it again
reduces it by one third and the sixth time by one quarter.
In order to return to normal playback, press the ZOOM
button a seventh time. It is always enlarged from the
centre of the picture.
FM MODE button
When a DVD is being played back, it is possible to adjust
the channel volume by pressing this button and the
VOLUME button.
Volume and Mute
The volume can be easily adjusted using the remote con-
trol. Press either the VOL+ button to increase the volume
or the VOL- button to reduce it. In order to switch off the
sound, press the MUTE button. When the MUTE button
is pressed again, the mute function is cancelled.
50
5....-05-DVD4606_GB 50
FUNCTIONS
Program (Programming))
It is possible to play back certain tracks in any order. If
the PROG button is pressed, the program menu appears
on the screen. Using the number buttons you can enter
the desired tracks.
In order to start the programme that has been entered,
move the cursor with the arrow buttons to „START" and
press the ENTER button. When you wish to stop pro-
grammed playback, press the STOP button. When the
STOP button is pressed the programming is deleted.
DVD Menu Setup
By pressing the SETUP key on the remote control, the
main setup menu appears. You can select the following
menus by pressing the right or left arrow button: GENE-
RAL SETUP, AUDIO SETUP, VIDEO SETUP, PASSWORD
and PREFERENCE menu (in stop mode).
1. After accessing the setup menu, press the scroll key
for up or down movement to select a desired Item.
Once an item is selected, press the PLAY key to
confi rm your entry and to move to the Sub-entry.
2. Use the left or right scroll key to move the pointer
and the up or down scroll key to select the Desired
option. Once an item is selected, press the ENTER
key to confi rm your selection.
This Completes the setup of the selected function.
3. You can leave the SETUP menu by pressing the
SETUP button.
09.07.2004, 10:03:08 Uhr