Power Connection; Basic Functions - AEG DVD 4606 HC Bedienungsanleitung

Before the power cable is inserted into the socket, all
connections should be checked again thoroughly. Then
the power cable is inserted carefully into the socket.
Press both POWER switches on the front of the device in
order to switch it on. The display lights up.
Selecting the Sound Source
1. Press the corresponding function button on the
remote control (DVD, TUNER, AUX1, AUX2) or the
INPUT button on the device in order to select the
desired sound source. The appropriate symbol
appears in the display.
44
5....-05-DVD4606_GB 44

POWER CONNECTION

When the device is switched on, a brief power surge
may cause interference to other electronic equipment
connected to the same power circuit. In this case the
device should be connected to a power socket on a
different circuit.

BASIC FUNCTIONS

Volume Control
The volume can be regulated either by turning the large
volume knob on the front of the device or by pressing
the corresponding button on the remote control.
Mute
When the MUTE button is pressed the loudspeakers are
switched off temporarily. When the button is pressed
a second time, the device returns to normal audio
playback.
09.07.2004, 10:02:56 Uhr