Dolby Setup
Video Setup
Press SETUP (6) on the remote control.
The main menu is displayed and General Setup is highlighted.
Repeatedly press
(8) until the menu item Dolby is highlighted.
Press
(8) to highlight a menu item.
Press
(8) to access the respective submenu.
Press
(8) and ENTER (7) to select the desired setting.
In menu item Dual Mono you set stereo or different mono playback
modes.
In menu item Dynamic you set the ratio between the quietest and loud-
est peak.
Press SETUP (6) on the remote control.
The main menu is displayed and General Setup is highlighted.
Repeatedly press
(8) until the menu item Video is highlighted.
Press
(8) to highlight a menu item.
Press
(8) to access the respective submenu.
Press
(8) and ENTER (7) to select the desired setting.
In menu item Component you select the unit output for video signals:
OFF (no output), YUV (component video) or RGB (composite video).
In menu item TV mode you select the display between "P-Scan" and
"Interlaced".
NOTE
►
This menu item is not adjustable in all software versions of this
unit.
In menu item Sharpness you set the image sharpness. Select between:
High/Medium/Low.
In menu item Brightness you set the image brightness with
value) or
(increase value).
In menu item Contrast you set the image contrast with
value) or
(increase value).
English
51
(decrease
(decrease