When Connected To An Hdmi-Compatible Device; When An Ipod/Iphone/Ipad Is Connected - Pioneer X-HM32V-K Bedienungsanleitung

12 Additional information

When connected to an HDMI-compatible device

Problem
Picture is not displayed.
Sound is not produced or is
distorted.
Multichannel audio signals
are not output.
Colors are not properly
displayed on TV screen.

When an iPod/iPhone/iPad is connected

Problem
Can't operate the iPod/iPhone/iPad by the remote control.
Can't operate the iPod/iPhone/iPad.
When the Bluetooth wireless technology device is connected or operated
Problem
The Bluetooth wireless technology device cannot be connected or
operated.
Sound from the Bluetooth wireless technology device is not emitted
or the sound is interrupted.
40
En
Check
Is the resolution properly set?
Is the HDMI cable properly
connected?
Is HDMI Out properly set?
Is HDMI Out properly set?
Is HDMI Color properly set?
Remedy
Set HDMI Resolution properly for the connected device (page 37).
Restore HDMI Resolution to the default setting (720x576p)
(page 37).
Connect the cable securely (all the way in).
With some cables, 1080p video signals will not be output.
Set HDMI Out to LPCM (2CH) or Auto (page 37).
Set HDMI Out to Auto (page 37).
Change the HDMI Color setting (page 37).
Remedy
Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 19).
Make sure the iPod/iPhone/iPad is connected correctly (refer to
Connecting your iPod/iPhone/iPad on page 19).
If the iPod/iPhone/iPad is experiencing a hangup, try resetting the
iPod/iPhone/iPad, and reconnect it to the unit.
Remedy
Check that no object that emits electromagnetic waves in the 2.4
GHz band (microwave oven, wireless LAN device or Bluetooth
wireless technology apparatus) is near the unit. If such an object is
near the unit, set the unit far from it. Or, stop using the object
emitting the electromagnetic waves.
Check that the Bluetooth wireless technology device is not too far
from the unit and that obstructions are not set between the
Bluetooth wireless technology device and the unit. Set the
Bluetooth wireless technology device and the unit so that the
distance between them is less than about 10 m* and no
obstructions exist between them.
* The distance given is to be used as a rough guide. The actual
allowable distance between devices may vary depending on
conditions in the surrounding environment.
The Bluetooth wireless technology device may not be set to the
communication mode supporting the Bluetooth wireless
technology. Check the setting of the Bluetooth wireless technology
device.