Yamaha ql5 Referenzhandbuch Seite 284

s MBC4
Parameter Range
LOW CROSSOVER 20 to 500Hz
MID CROSSOVER 80 to 10kHz
HIGH CROSSOVER 1k to 15kHz
LOW GAIN -18.0dB to 12.0dB
LOW THRESHOLD -80.0dB to 0.0dB
LOW RATIO 1.0:1 to 20.0:1
LOW ATTACK 0.1 to 120ms
LOW RELEASE 5 to 1000ms
LOW COMP IN ON, OFF
LOW CUE ON ON, OFF
LOW MID GAIN -18.0dB to 12.0dB
LOW MID
-80.0dB to 0.0dB
THRESHOLD
LOW MID RATIO 1.0:1 to 20.0:1
LOW MID ATTACK 0.1ms to 120ms
LOW MID RELEASE 5ms to 1000ms
LOW MID COMP IN ON, OFF
LOW MID CUE ON ON, OFF
HIGH MID GAIN -18.0dB to 12.0dB
HIGH MID
-80.0dB to 0.0dB
THRESHOLD
HIGH MID RATIO 1.0:1 to 20.0:1
HIGH MID ATTACK 0.1ms to 120ms
HIGH MID RELEASE 5ms to 1000ms
HIGH MID COMP IN ON, OFF
HIGH MID CUE ON ON, OFF
HIGH GAIN -18.0dB to 12.0dB
HIGH THRESHOLD -80.0dB to 0.0dB
HIGH RATIO 1.0:1 to 20.0:1
HIGH ATTACK 0.1ms to 120ms
HIGH RELEASE 5ms to 1000ms
HIGH COMP IN ON, OFF
HIGH CUE ON ON, OFF
Description
Crossover frequency between the low and low mid bands
Crossover frequency between the low mid and high mid bands
Crossover frequency between the low high mid and high
bands
Low band gain
Threshold of low band
Ratio of low band
Attack time of low band
Release time of low band
Switches the compressor of low band on/off
If this is on, the low band signal will be sent to the CUE bus for
monitoring.
Low mid band gain
Threshold of low mid band
Ratio of low mid band
Attack time of low mid band
Release time of low mid band
Switches the compressor of low mid band on/off
If this is on, the low mid band signal will be sent to the CUE bus
for monitoring.
High mid band gain
Threshold of high mid band
Ratio of high mid band
Attack time of high mid band
Release time of high mid band
Switches the compressor of high mid band on/off
If this is on, the high mid band signal will be sent to the CUE
bus for monitoring.
High band gain
Threshold of high band
Ratio of high band
Attack time of high band
Release time of high band
Switches the compressor of high band on/off
If this is on, the high band signal will be sent to the CUE bus for
monitoring.
Parameter Range
MASTER GAIN -18.0dB to 12.0dB
KNEE HARD, 1, 2, 3, SOFT
FLAVOUR VCA, OPTO
HARMONICS ON, OFF
LINK GAIN -
LINK THRESHOLD -
LINK RATIO -
LINK ATTACK -
LINK RELEASE -
s Automixer Parameters
Parameter Range
Group a, b, c
Override OFF/ON
ChMode man, auto, mute
ChModePreset man, auto, mute
Weight –100 to 15
MeterType gain, input, output
MasterOverride OFF/ON
MasterMute OFF/ON
Gain 0 to 127
InputLevel 0 to 127
OutputLevel 0 to 127
PostWeightingFilter 0 to 127
22
Description
Master gain
Knee of compressor
Compressor type
Switches the harmonics on/off
Links and controls the gain of the four bands
Links and controls the threshold of the four bands
Links and controls the ratio of the four bands
Links and controls the attack time of the four bands
Links and controls the release time of the four bands
Description
Channel control field group
Turns on/off overriding of the channel control field
Channel control field mode (man/auto/mute)
Preset setting of the channel control field
Relative sensitivity among input channels in the channel
control field
Meter type of the master field
Turns on/off overriding of the master field
Turns on/off the mute setting of the master field
Automixer gain displayed for each channel when the meter
button of the master field is set to "gain"
Input level displayed for each channel when the meter button
of the master field is set to "input"
Output level displayed for each channel when the meter
button of the master field is set to "output"
Level indicator of the channel control field
Data List