Programming Memory Pads For 2 Or 3 Stages Heating - Panasonic NE-1027 Bedienungsanleitung

√ Programming Memory Pads for 2 or 3 Stages Heating:

Example: To program for 2 minutes at 340 W for 2nd stage heating using Memory Pad 5
PAD
5.
6.
2
0
0
7.
NOTE: ≥Program the remaining Memory Pads as desired by repeating the steps above.
DO NOT OPEN THE OVEN DOOR during programming.
NOTE: ≥For 3 stages heating, select a further power level and set the desired heating time between steps 6
and 7 above.
How to Operate
≥Complete steps 1 to 4 on page 12.
≥Press the Power Level Pad 3 times. "b" is now
displayed.
≥Press the Memory Pads 2, 0 and 0.
≥Press the Program Pad again. You have
completed programming the selected Memory
Pad for 2 stages heating. Double heating time for
double quantity heating was automatically set.
≥2 seconds later, the display will confirm your
programming.
≥After all of your programming has been
completed, the display will go blank.
- 13 -
INSTRUCTION
1
1 2
1 2
1 2
1
2
x2 1 2
x2
1
x2 2