Programmed Heating - Panasonic NE-1027 Bedienungsanleitung

B. Programmed Heating:
Example: 1 stage; Memory Pad 9 to heat for 3 minutes at 1000 W
PAD
1.
9
2.
3.
Beep tone will sound.
(See page 17)
Example: 2 stages; Memory Pad 3 to heat for 3 minutes at 1000 W and 2 minutes at 340 W
PAD
1.
3
2.
3.
Beep tone will sound.
(See page 17)
For Double Quantity Heating
The Double Quantity (k2) Pad is preset at the factory to automatically double the programmed time for double
quantity heating. (See page 13 for programming the Double Quantity Pad.)
Example: Memory Pad 5
PAD
1.
x2
2.
5
3.
4.
Beep tone will sound.
(See page 17)
How to Operate
≥Press the Memory Pad 9. In Program Lock Mode
the oven will start without pressing the Start Pad.
(See page 15)
≥Press the Start Pad.
Heating will start. The time on digital display will
count down.
≥All heating will stop. When opening the door, the
display will stop blinking.
≥Press the Memory Pad 3. In Program Lock Mode
the oven will start without pressing the Start Pad.
(See page 15)
≥Press the Start Pad.
The total time for both stages will be displayed.
The time on digital display will count down.
Heating will start.
≥When the oven shifts to the next stage, a single
beep tone will sound.
≥All heating will stop. When opening the door, the
display will stop blinking.
≥Press Double Quantity Pad.
≥Press the Memory Pad 5. In Program Lock Mode
the oven will start without pressing the Stert Pad.
(See page 15)
≥Press the Start Pad.
Heating will start. The time on digital display will
count down.
≥All heating will stop. When opening the door, the
display will stop blinking.
- 11 -
INSTRUCTION
INSTRUCTION
INSTRUCTION
1
1
1 2
1 2
2
x2
x2
1
x2
1