Werbung
Material
GRP to
plywood
GRP to
aluminium
GRP to
plywood
Areas of the fuselage which are to be glued must be rubbed down with fine-grit
glasspaper to remove any lingering traces of mould release agent. Carefully remove
all sanding dust. Aim at reducing the glossy surface to a matt finish, otherwise there
is no chance of a durable glued joint between the fuselage and other parts.
When using adhesives it is important to observe the instructions supplied by the glue
manufacturer. The main Graupner FS catalogue includes many other types of
adhesive.
When you are using solvent-based glues be sure to provide good ventilation in your
workroom.
Read the adhesive manufacturer's instructions.
Radio control system
We particularly recommend computer radio control systems, from the mc-12 to the
mc-24.
or
Recommended servos:
Rudder
Elevator
Ailerons
Airbrakes
Aero-tow release
We recommend the DS 19 or SMC 19 receiver, or the XR-20 iFS unit.
Order No. 3050
Servo extension leads
Order No. 3935.105
Order No. 3935.18
Order No. 3935.11
Order No. 3935.50
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler Ident. # 0059183
Typical joint
Fuselage to servo
plate
Fuselage to aero-tow
mechanism
Instrument binnacle to
seat support framework
DS 8411
DS 8411
DS 3328
DS 3328
DS 8231
Power switch harness
for ailerons
for connecting servo leads to receiver
for connecting servo leads to receiver
for connecting servo leads to receiver
35
Adhesive
Order No.
UHU plus endfest 300
Order No. 950.43
UHU plus endfest 300
Order No. 950.43
UHU plus schnellfest
Order No. 962
Order No. 5151
Order No. 5151
Order No. 5157
Order No. 5157
Order No. 5155
1 required
1 required
2 required
2 required
1 required
1 required
2 required
2 required
2 required
1 required
4.2008
Werbung
