Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
XV-Z9000U/E
No.
Adjusting point
11
NTSC color
saturation
adjustment
12
PAL color
saturation
adjustment
13
SECAM color
saturation
adjustment
14
DTV BRIGHT-
NESS adjust-
ment
(Take this
procedure for
Model XV-
Z9000U only.)
15
DTV CONTRAST
adjustment
(Take this
procedure for
Model XV-
Z9000U only.)
16
DVD color
saturation
adjustment
DVD tint adjust-
ment
Adjusting conditions
1. Feed the internal 8CH (split
color bar) signal.
INPUT4
2. Select the following group
and subject.
Group:
VIDEO1
Subject: N-COLOR
1. Feed the PAL color bar sig-
nal.
INPUT4
2. Select the following group
and subject.
Group:
VIDEO1
Subject: P-COLOR
1. Feed the SECAM color bar
signal.
INPUT4
2. Select the following group
and subject.
Group:
VIDEO1
Subject: S-COLOR
1. Feed the 100% color bar
signal (component signal)
or the 10-step gray scale
signal to the input terminal
480I.
INPUT2
2. Select the following group
and subject.
Group:
DVD
Subject: BRIGHT
1. Feed the 100% color bar
signal (component signal)
or the 10-step gray scale
signal to the input terminal
480I.
INPUT2
2. Select the following group
and subject.
Group:
DVD
Subject: CONTRAST
1. Feed the 100% color bar
signal (480I component
signal) to the Y, Pb and Pr
input terminals.
INPUT2
2. Select the following group
and subject.
Group:
DVD
Subject: COLOR
TINT
Adjusting procedure
1. Check the fixed setting.
Fixed setting: 105
1. Check the fixed setting.
Fixed setting: 110
1. Check the fixed setting.
Fixed setting: 110
1. Using the control switches on the set or the buttons
on the remote control, adjust the setting until more
bit dropouts start at the 0% black level.
1. Using the control switches on the set or the buttons
on the remote control, adjust the setting until bit drop-
outs start at the 100% white level.
1. Check the fixed settings.
Fixed setting:
TINT at 32
COLOR at 36
26
Werbung
Inhaltsverzeichnis
