Removing Of Major Parts - Sharp XV-Z9000U/E Service Anleitung

XV-Z9000U/E
1. Removing the top panels
1-1. Remove the six lock screw.
1-2. Press on side Arrow A of the bottom body
and Lift the rear body.
1-3. Disconnect the connector.
1-4. Press on front Arrow B of the bottom
body and unhook the claws, and detach
the top body.

REMOVING OF MAJOR PARTS

2-1. Remove the two screws and detach the LED PWB.
2-2. Remove the one screw and detach the R/C PWB.
2-3. Remove the three screws and detach the operation PWB.
2-1
Top body
1-4
1-4
1-1
1-4
B
1-4
R/C PWB
2-2
LED PWB
1-1
B
14
2-3
Operation PWB
1-1
1-3
1-2
A A
1-1