Abbildung B-11: Integral - Dc-Eingangsleistung, Modbus-Ausgang; Abbildung B-12: Fern - Dc-Eingangsleistung, Modbus-Ausgang - FCI ST100 Betriebshandbuch

Durchflussmessgerät der Serie ST100
JUMPER A(+)
JUMPER B(-)
DC Input Power
24 VDC 20%
Customer Connection
16-22 Ga Wire
JUMPER A(+)
JUMPER B(-)
DC Input Power
24 VDC 20%
Customer Connection
16-22 Ga Wire
Fluid Components International LLC
Abbildung B-11: Integral – DC-Eingangsleistung, Modbus-Ausgang
Remote Cable, Shielded
300-1000 ft
Abbildung B-12: Fern – DC-Eingangsleistung, Modbus-Ausgang
JUMPER, TERMINATION RESISTOR JP6*
JUMPER, TERMINATION RESISTOR JP7*
* Internal termination resistor.
only use if unit is at end of line
and external termination resistor
is not used.
GROUND
JUMPER, TERMINATION RESISTOR JP6*
JUMPER, TERMINATION RESISTOR JP7*
* Internal termination resistor.
only use if unit is at end of line
and external termination resistor
is not used.
LINE A (+)
GROUND
LINE B(-)
Remote Flow Transmitter
ANHANG B – SCHALTPLÄNE
LINE A (+)
LINE B (-)
C01013-1-3
(Element)
C01012-1-3
65