Adj. In Function - Sharp XV-C100A Anleitung

XV-C100A/M/E
ADJ. IN (adjustment input) FUNCTION
1. Keys used for the adjustments
On the sub PWB:
Control keys:
2. Operation
Press S2001 to call up the ADJ IN mode.
Use the [SELECT/ADJ. '] and [SELECT/ADJ."] keys to select an adjustment group, and press the
[ENTER] key.
Use the [SELECT/ADJ. '] and [SELECT/ADJ."] keys again to select an adjustment subject, and
press the [ENTER] key.
The [SELECT/ADJ. '] and [SELECT/ADJ."] keys are also used to make adjustments.
Each time the [ENTER] key is pressed on the ADJ IN screen, the adjustment subjects of a group are
changed one by one. (Pressing the [VOLUME + ] key changes the subjects in the reverse order.)
When the [MENU] key is pressed, the previous group appears on the screen.
Press S2001 again to go out of the ADJ IN mode.
VIDEO 1
H-CENT
P-H-CENT
CONT
BRIGHT
Adjustment
SUB-R
subjects
SUB-G
SUB-B
The adjustment group "LINE" is not used here.
Do not feed the signal when the adjustment group "N • W" is used.
S2001
[ENTER], [MENU], [SELECT/ADJ.'], [SELECT/ADJ."], [VOLUME+]
Group
VIDEO 2 VIDEO 3
C-CONT
SUB-BIAS GAMMA1
R-BIAS GAMMA2
C-BRIGHT
B-BIAS AGCADJ
C-COLOR
R-DRIVE T-BRT
C-TINT
B-DRIVE
C-H-CENT
TINT
COLOR
C-PH-CENT
P-COLOR
S-COLOR
14
VIDEO 4 SET N • W
HL RED
GREEN
BLUE
N • W
LINE TEST
AUTO TIME1
OFF TIMER TIME2
TEMP1
TEMP2
FACTORY SET4