Werbung
i nstruC t io ns f or u se
Winding the watch
the movement is wound by turning the crown clockwise. About
40 winds of the crown are generally enough to ensure reliable
functionality. under normal circumstances, simply wearing
the watch every day should suffice to keep the self-winding
mechanism wound. the power reserve allows you to take off
your watch overnight without having to re-wind it.
Time adjustment
Pull out the crown carefully. in this crown position, the motion is
paused. this helps you to set the watch precisely. turn the crown
to set the desired time. the movement restarts as soon as you
push the crown back into the starting position again.
second hand
Main stopwatch second hand
Push-piece "Z":
records intermediate times and synchronises the
stopwatch seconds hands.
The split-seconds chronograph/rattrapante
Press push-piece "A" to start timing. Press again to stop timing.
Press push-piece "A" a third time to continue timing. this enables
you to time multiple events.
the split-seconds mechanism allows you to stop intermediate
times without affecting the motion of the main chronograph
hand. to do so, press push-piece "Z" while timing. the split-
seconds hand will stop. by pressing push-piece "Z" again, you
can bring the split-seconds hand into renewed synchrony with
the main chronograph hand.
once you have finished timing, you can reset all stopwatch
hands to zero by pressing push-piece "b". To protect the
movement, the push-piece is mechanically blocked during
timing.
Any attempt to forcefully overcome this could damage
the
movement. if the split-seconds hand is not synchronised, it
will remain in its last position. Press push-piece "Z" to synchronise.
Push-piece "A":
starts or stops timing.
Push-piece "b":
resets all stopwatch hands to zero.
split-seconds hand
stopwatch minute hand
19
Werbung
