Werbung
GB - ENGLISH
Operating Instructions
Dear Customer,
Many thanks for the confidence you have shown in us with the purchase of your new JET-machine. This manual has been
prepared for the owner and operators of a JET JTS-254 table saw to promote safety during installation, operation and
maintenance procedures. Please read and understand the information contained in these operating instructions and the
accompanying documents. To obtain maximum life and efficiency from your machine, and to use the machine safely, read
this manual thoroughly and follow instructions carefully.
1. Declaration of conformity
2. Warranty
3. Safety Rules
4. Technical Specification and Machine Operation
1. Declaration of conformity
On our own responsibility we hereby declare that this
product complies with the regulations* listed on page 2.
Designed in consideration with the standards**. CE type
examination*** conducted by****.
2. Warranty
The Seller guarantees that the supplied product is free
from material defects and manufacturing faults. This
warranty does not cover any defects which are caused,
either
directly
or
indirectly,
carelessness, accidental damage, repair, inadequate
maintenance or cleaning and normal wear and tear.
Guarantee and/or warranty claims must be made within
twelve months from the date of purchase (date of
invoice). Any further claims shall be excluded.
This warranty includes all guarantee obligations of the
Seller and replaces all previous declarations and
agreements concerning warranties.
The warranty period is valid for eight hours of daily use. If
this is exceeded, the warranty period shall be reduced in
proportion to the excess use, but to no less than three
months.
Returning rejected goods requires the prior express
expense.
Further warranty details can be found in the General
Terms and Conditions (GTC). The GTC can be viewed at
www.jettools.com
or can be sent by post upon request.
The Seller reserves the right to make changes to the
product and accessories at any time.
by
incorrect
use,
3 SAFETY RULES
FOR YOUR OWN SAFETY, READ INSTRUCTION
MANUAL BEFORE OPERATING THE TOOL.
well as the specific
hazards peculiar to it.
ADJUSTING KEYS AND WRENCHES.
From habit of checking to see that keys and
adjusting wrenches are removed from tool before
benches invite accidents.
use power tools in damp or wet locations, or expose
them to rain. Keep work area well.
children and visitors should be kept a safe distance
from work area.
master switches, or by removing starter keys.
safer at the rate or which it was designed.
do a job for which it was not designed.
gloves, neckties, bracelets, or jewelry to get caught
in moving parts. Non-slip foot wear is recommended.
Wear protective hair covering to contain long hair.
PROTECTIVE EQUIPMENT, INCLUDING
(1) Wear safety glasses. (2) Hearing protection. (3)
Respiratory protection. (4) Wear gloves when
handling saw blades and rough material. Saw blades
shall be carried in a holder whenever practicable.
frees both hands to operate tool.
balance at all times.
sharp and clean for best and safest performance.
Follow instructions for lubricating and changing
1
- With padlocks,
r hand and
Werbung
