Herunterladen Inhalt Inhalt Diese Seite drucken

Linksys WAG54G Benutzerhandbuch Seite 71

Vorschau ausblenden Andere Handbücher für WAG54G:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Wireless-G ADSL Gateway
3. The IP Filter List screen should appear, as shown in Figure C-4. Enter an appropriate name, such as win-
>Gateway, for the filter list, and de-select the Use Add Wizard check box. Then, click the Add button.
4. The Filters Properties screen will appear, as shown in Figure C-5. Select the Addressing tab. In the Source
address field, select My IP Address. In the Destination address field, select A specific IP Subnet, and fill in the
IP Address: 192.168.1.0 and Subnet mask: 255.255.255.0. (These are the Gateway's default settings. If you
have changed these settings, enter your new values.)
5. If you want to enter a description for your filter, click the Description tab and enter the description there.
6. Click the OK button. Then, click the OK (for Windows XP) or Close (for Windows 2000) button on the IP Filter
List window.
Filter List 2: Gateway=>win
7. The New Rule Properties screen will appear, as shown in Figure C-6. Select the IP Filter List tab, and make
sure that win -> Gateway is highlighted. Then, click the Add button.
Appendix C: Configuring IPSec between a Windows 2000 or XP Computer and the Gateway
How to Establish a Secure IPSec Tunnel
Figure C-4: IP Filter List
Figure C-5: Filters Properties
Figure C-6: New Rule Properties
64

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis