Denon AVR-580 Bedienungsanleitung Seite 3

This function allows you to adjust the time delay of the video and audio signals and store these sett ngs for the
d fferent input sources
The setting is made while watching a DVD or other software, so it s not made here
By default, this is not displayed when no digital signals are being input
For instruct ons on making the setting, refer to page 8
The surround mode last used for the three types of nput signals shown below is stored in the memory a_d the
signal is automatically played with that surround mode the next time it s input
Note that the surround mode setting is also stored separately for the different input sources
F ¸,
l, Analog and PCM 2-channel signals
/,
,2, 2-channel signals of Dolby Digital, DTS or othel multichannel format
,3, Multichannel signals of Dolby Digital, DTS or other mult channel format
1 _ --_\ Select"Aut°Surr°undM°de"°ntheSystem I. Syst'mSetup Menu
Setup Menu screen, then press jog stick Audlo Delay
"ENTER" Multi Zone Control
_Auto Surround Mode
Di|itel Multi Ch In
On Screen Dlaplay
Auto Tuner Presets
Setup Lock
3
DENON Link setting :
Set this whe_l connecting a Denon DVD player using the Denon Link
terminal
-
Dliltal Multi CH In
=DENON Link <_v
No Dillltal <ANALOG_
Set to "ON" if you want to use the terminal, Signal
"OFF" if you do not want to use t Digital Ext. ln <_
Wllen set to "ON", also set the playback
i_lput when there is no dig tal signal s. Beck _NOT USED_
ANALOG: The analog input of the input source assigned to Denon Link is
played
EXT-1 : The EXTIN-1 nput is played
EXT-2: The EXT IN-2 input is played
Digital Ext, In setting :
This is set for the D gital Ext In input using the Coaxial 1 to 4 inputs
When set to "ON'r the four terminals (Coaxial I to 4) are
_ assigned to the desired input source as a single digital
multichannel input
When set to "OFF" the four terminals (Coaxial 1 to 4) are
assigned to individual input sources
Digital Multi CH In
DENON Link 4_k
NO Di=ltal _ANALOG_
Signal
_Dlgltel Ext. ln 4_>
S. Back <NOT USED_
When "ON" was selected at "Digitl Ext In", set the surround back channel input
If you do not want to use the surround back channel ........ NOT USED
If you do want to use the surround back channel, set according to the specificat ons of the connected
player
--_ Select 'roN'r Ef yOU waist to use the auto surround mode,
r'OFF" if you do not want to use it Auto Surround Mode
EnteE the setting
The System Setup Menu reappears
Enter the setting
The System Setup Menu reappears
_;_ _[l_I I_j II'I [_1[I_: IIll
The system setup sett ngs can be locked so that they cannot be cha_ged easily
_,,_ Select "Setup Lock" on the System Setup _ System Setup Menu %
Menu screen, then press iog stick 'rENTER" J_Audi° Delay
to SWitCh tO the Setup Lock screen Multi Zone Control
Auto Surround Mode
01gltal Multi Ch In
On Screen Display
Auto Tuner Presets
Setup Lock
Select "Digital Multi Ch In" on the System
Setup Menu screen, then press jog stick
"ENTER"
_ System Setup Menu
Audio Delay
Multi Zone Control
Auto Surround Mode
_DIKItal Multi Ch In
On Screen DIsplay
Auto Tuner Presets
Setup Lock
2
wm
©
Select "ON", to lock the system setup settings
Setup Lock
Press jog stick "ENTER" to finalize the sett ng and exit the system setup mode
When the setup lock function is activated, the settings listed below cannot be changed,
and "Setup Locked" s displayed when related buttons are operated
• System setup settings
• Surround parameter settiiigs
• T_ne control settings
• Channel level settings (including test tones)
T_ unlock, press the System Setup button again and display the Setup Lock screen, then
select "OFF"
3