Sage Smart Scoop BCI600 Kurzanleitung Seite 9

OPERATION
PRE-COOL
NOTE
PRE-COOL can only be operated in the
stand by mode, before pressing start
cancel button.
a) PRE-COOL lowers the temperature of the
ice cream machine to reduce the time it
takes to prepare your dessert. It is optional
and is ideal to use while you are preparing
your ice cream base before churning.
b) To select PRE-COOL function, press the
PRE-COOL button. The light surrounding
the button will turn from white to red to
indicate that the machine is in
PRE-COOL mode.
This mode will 'PRE-COOL' the machine to
approximately -10°C to -30°C, taking about
5-10 minutes. READY will illuminate and
PRESS START will flash on the LCD screen
when the ice cream maker has reached
optimal temperature.
The paddle will start turning after 15
minutes has passed, but will not start
making the frozen dessert unless the
START / PAUSE button is pressed.
In this function, the LCD screen will display
the temperature, PRE-COOLING will
illuminate and the progress indicator will
scroll, to let you know that you are in
this mode.
c) PRE-COOL will return to standby after
20 minutes or alternatively can be switched
off either by pressing
PRE-COOL button again or pressing the
START / PAUSE button which will override
the pre-cooling mode.
NOTE
START / PAUSE button will have to be
pressed to start the churning process after
pre-cooling.
EN
9