Grundig LENARO 92 MFW 92-6110/9 DVD Service Anleitung Seite 25

DIGI 100
14
18
GRUNDIG Service
CONNECTION AND PREPARATION
Connecting a computer (VGA)
Your television can be used as a PC monitor.
The television can be set to the following input signals:
640 x 480 pixels, 60 Hz/31.5 kHz
640 x 400 pixels, 70 Hz/31.5 kHz
640 x 350 pixels, 70 Hz/31.5 kHz
VGA
AV1
IN
AUDIO IN
AV2
1
Connect VGA source (e.g. computer, game console) to the »VGA« socket
using a standard VGA cable.
2 Connect the audio output of the computer (if there is one) to the
sockets with a standard audio cable (cinch terminal plug 3.5 mm ø).
Note:
One of the above-mentioned resolutions must be set on the PC (see PC con-
trol system).
If a laptop is connected, its display must be switched off (via the keyboard or
control system; see the operating manual of the laptop).
When connecting a laptop, first connect the laptop and then switch it on.
SETTINGS
____________________________________________________________________________________
Loudspeaker and Dolby configuration
In order to receive optimal sound from Dolby Digital/Dolby Surround ProLogic,
various settings must be made.
Loudspeaker configuration
1 Call up »EASY DIALOG« with the »i« button.
2 Select the »Installation« line with
firm.
– The relevant menu items are located on the second page of the »Installa-
tion« menu.
3
Select the »Speaker configuration« line with
»OK« to confirm.
4 Select the loudspeaker to be set with
»OK« (e.g. front left/right).
5
Select the »Connection« line with
firm.
Note:
The following settings are available for all loudspeakers:
»External passive« – Connect passive loudspeakers to the terminal sockets.
»External active«
The following additional setting options are available:
Front L/R
»internal«
Center
»Off«
»internal«
_______________________________________
»P +« or »P –« and press »OK« to con-
»P +« or »P
»P +« or »P –« and confirm with
»P +« or »P – « and press »OK« to con-
– Connect active loudspeakers to the cinch sockets.
– The built-in loudspeakers are used.
– No center loudspeaker.
– The built-in front loudspeakers are used as center
loudspeakers.
Allgemeiner Teil / General Section
»AUDIO
IN«
–« and press
1 - 25