Inhaltsverzeichnis
Werbung
List of Contents
Introduction ...................................................................................................................................................7
Prescribed Use ..............................................................................................................................................7
Safety Instructions.........................................................................................................................................8
Scope of Delivery ..........................................................................................................................................9
Unpacking and Set-up ..................................................................................................................................9
Operation.......................................................................................................................................................9
Installation .....................................................................................................................................................9
Fuse Replacement.......................................................................................................................................10
Transport .....................................................................................................................................................10
Disposa........................................................................................................................................................10
Maintenance and Care ................................................................................................................................10
Technical Data.............................................................................................................................................10
Safety Instructions
The guarantees become invalid in the event of damage resulting from non-observance of the operat-
ing manual! We do not accept responsibility for such damage!
Moreover, we accept no responsibility for property damage or personal injuries caused by improper
use or non-observance of the safety instructions! Furthermore, in all such cases guarantees become
invalid!
The unauthorized conversion or modification of the product is not permitted for safety and approval reasons
(CE)!
Do not expose the device to high temperatures, strong vibrations or shocks, extreme humidity or strong
mechanical stress! Do not cover the air intake aperture at the back of the device! Place the device onto an
even, stable and flame-retardant surface, so that air easily can enter and the soap bubbles can come out
without any problems.
Never drink the soap bubble concentrate or apply it to your skin! Inn case of contact with your skin or your
eyes, rinse thoroughly with water (seek immediate medical care, if necessary!). Keep the soap bubble con-
centrate out of reach of children and keep it in a safe place!
The liquid might leave stains on your clothing.
Always observe the safety instructions on the device. Never operate the device unattended!
Do not point the soap bubble outlet directly at people, animals or into the open fire. The bursting soap bub-
bles might lead to a slippery surface which might involve dangers and accidents.
Never pour liquids over the device. There is danger of burning or a life-threatening electric shock. If, never-
theless, this should be the case, immediately separate the mains plug from the mains socket and consult an
expert.
This product is not a toy! Therefore, keep it out of reach of children! Only adults are allowed to operate this
device!
Separate the device from the mains when not using it for a longer period of time.
If there is reason to believe that safe operation has become impossible, the device must be put out of oper-
ation and secured against unintended operation.
It can be assumed that safe operation is no longer possible, if:
8
• the device or connecting cables show visible damage
• the device no longer works
• it was stored under unfavourable conditions for a long period of time or
page
• it was exposed to extraordinary stress caused by transport.
Before cleaning the device or performing maintenance work, please observe the following safety instruc-
tions:
When opening covers or removing parts, you might expose live parts. Therefore, disconnect the device
from all voltage sources and connections before you perform maintenance work or repairs. Capacitors
inside the device might still carry voltage even though you have disconnected all voltage sources. Repair
work must be carried out by an expert familiar with the involved dangers and the relevant regulations!
Do not leave packaging material lying around! Plastic foils and bags, polystyrene parts etc. might become a
dangerous toy for children!
Scope of Delivery
1 Soap Bubble Machine
1 fastening hoop
2 wing screws
1 operating manual
Unpacking and Set-up
Remove the form parts of the transport packaging. Keep them for further transports. Place the device onto
an even, stable, water-resistant and flame-retardant surface! Keep it out of reach of children!
Operation
Carefully read the safety instructions!
Please make sure that the mains plug is disconnected.
Unscrew the black knurled screws at the front of the device, on the bottom right and left. Remove the
recessed head screws next to the knurled screws. They serve as transport retention; keep the recessed
head screws for further transports. Put your hand under the black guiding plate at the front of the Soap
Bubble Machine and open the device. Remove the liquid container and fill in the soap bubble liquid.
Only use special Soap Bubble concentrate thinned with water and approved for this purpose. (Con-
rad item no. 59 00 13 normal, item no. 59 00 19 UV-active).
The container holds approx. 400ml liquid. Do not overcharge the container and make sure not to spill any
liquid or that no liquid gets into the Soap Bubble Machine. There is danger of an electric shock if liquid gets
into the device. Put the liquid container back into the device and close the device. Tighten the knurled
screws at the left and at the right. Verify that the soap bubbles get out of the device without any dangers for
people or animals and that air can get into the device at its back without taking any objects. Connect the
mains plug to a properly installed 230VAC mains socket. Switch the device on (or off) by means of the
switch at the back of the device. Now, the device starts producing the soap bubbles.
Installation
The Soap Bubble Machine can be fastened stationary by means of the fastening hoop enclosed in the deliv-
ery. Attach the fastening hoop to the place of installation. Keep a minimum distance of 50 cm between
Surfaces and people. Attach the Soap Bubble Machine to the fastening hoop by means of the two wing
screws and bring it into the desired position. When attaching the device by means of the fastening hoop, the
Soap Bubble Machine has to be additionally secured with a safety rope.
9
Werbung
Inhaltsverzeichnis
