Listening To The Radio - AEG DAB 4124 Bedienungsanleitung

English
38
DAB/FM button (3)
For switching between DAB and FM mode.
VOL+/VOL- Volume (6)
Adjust to your preferred volume level. The higher the volume,
the more blocks are filled in.
headphone jack (12)
When listening via headphones, please use headphones with
a 3.5 mm stereo jack plug which you will connect to the head-
phone jack. The speakers will be deactivated.
Delayed shut-off (SLEEP)
The delayed shut-off function can be used in radio mode.
The device automatically switches off when the selected time
is reached.
• Select the time by repeatedly pressing the SLEEP/ but-
ton (10), after which the device switches off. Select from:
15, 30, 45, 60, and 90 minutes.
• The SLEEP OFF setting deactivates this function.
NOTE:
Briefly press the SLEEP/ button to show the remaining
time.
This function can also be activated via the Settings menu.
see section "Settings menu."

Listening to the radio

Scan FM stations
1. Repeatedly press DAB/FM/ button (3) until the display
shows "FM MODE".
2. You have two options for tuning a station:
- Press the / buttons (6).
- Keep the BACK/SCAN button (4) pressed. The device
searches for the next radio station
3. If the reception is too weak and there is noise on the re-
ceived station, try to improve the reception by changing
the position of the telescopic antenna. If the reception is
poor, we recommend switching to "FORCED MONO"
(Mono) in the "AUDIO SETTING" menu
"Settings menu".
NOTE:
Press ENTER button (5) to toggle between Stereo and
Mono mode.
Show FM information
Press the INFO/MENU button (2) to show the following
information, if broadcasted by a radio station.
• Radio Text is shown by default on the display. If no
information is available, [No RadioText] appears on the
display.
• The program type (PTY) of the station is displayed (e.g.
Pop music, news etc.). If no PTY is received, [No PTY] ap-
pears on the display.
• Display the station name. If no name is received, [No
Name] appears on the display.
• The set audio mode is displayed. STEREO or MONO.
• Display the time.
• Display the date.
Scan DAB stations
Digital Audio Broadcasting (DAB) is a digital broad casing
standard for terrestrial reception of digital radio. A list of radio
stations which can be received in Germany is available on the
Internet at www.digitalradio.de.
NOTE:
In Germany approx. 70% of the country' s area is covered by
digital radio broadcasts (as of Nov. 2011). In the individual
areas however, coverage and provision vary greatly. If the
DAB stations in your region cannot be received or only with
interferences depending on location, in this case you can
switch to the FM band to receive this station. This is only
possible however if these stations are broadcast via UKW.
Find out more on the internet site of the radio station.
1. Press the DAB/FM button (3) repeatedly until "DAB
MODE" appears on the display.
2. Keep the BACK/SCAN button (4) pressed. The device
then searches for the radio stations which can be re-
ceived.
3. You can select the next or the previous station by using
the / buttons (6).
4. If the reception is too weak and the received station
"motorboats", try to improve the reception by changing
the position of the antenna.
NOTE:
• For optimum DAB reception, we recommend to align
the telescopic antenna vertically.
• You cannot toggle between Mono and Stereo during.
• To manually set a DAB frequency, proceed as de-
scribed in the "Settings menu" section.
see section
Display additional DAB information
In DAB mode, you can display the following additional infor-
mation if broadcast by the radio station. To do so, press the
INFO/MENU button (2).
The DLS text is shown on the display by default.
• DLS: Short for Dynamic Label Segment. This involves
complementary data. This content may be e.g. informa-
tion about the station or the music title and artist being
played.
• Displays the received signal strength.
• This indicates the station category (e.g. Pop-Music, News
etc.).