Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Upgrading the RC-D24
The following procedure explains how to upgrade the D24's remote controller, the
RC-D24. Be sure to use the MO disk labelled "Ver. 2.00 DISK."
Turn off the D24.
1
Connect the RC-D24 to the D24.
2
Turn on the D24.
3
Turn on the RC-D24.
4
Confirm that "00:00:00.00" is shown on the RC-D24 display.
5
Insert the MO disk labelled "Ver. 2.00 DISK" into the D24.
6
When the message "UNFORMATTED" appears on the 2nd line of the display
7
(which takes about 10 seconds), press the [UTILITY] button.
Use the JOG/DATA dial to select "UPDATE," and then press the [ENTER] but-
8
ton.
When the message "UPDATE – D24" appears, use the JOG/DATA dial to select
9
"RCU," and then press the [ENTER] button.
The message "WAITING" appears. The RC-D24 and D24 counters count up from
1/374" to "374/374," which takes about 120 seconds. After a further 20 seconds the
RC-D24 transport buttons start flashing. The upgrade procedure is now complete.
Warning: Do not turn off the D24 or RC-D24 before the transport buttons start flashing.
To check the version number, first turn off and on the D24, and then, while
10
pressing the RC-D24's [RTN TO ZERO] button, turn on the RC-D24.
The RC-D24 version number appears on the display as follows: "200 xxxxxx".
D24—Version 2.0 Supplement
Werbung
Inhaltsverzeichnis
