To Answer An Incoming Call; Basic Operations - Pioneer MVH-180UI Bedienungsanleitung

To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears first then a phone
menu will display. To switch to another phone, press
2
Turn the M.C. dial to select [RECENTS] or [PHONE BOOK], then press to
confirm.
If you select [PHONE BOOK], proceed to step 4.
3
Turn the M.C. dial to select [MISSED], [DIALLED] or [RECEIVED], then
press to confirm.
4
Turn the M.C. dial to select a name or phone number, then press to
confirm.
The phone call starts.

To answer an incoming call

1
Press when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call
while one phone is being used for a call, a message will appear in the display. To answer that
incoming call, you need to end the existing call.

Basic operations

Purpose
End a call
Reject an incoming call
Switch between the current
caller and a caller on hold
Cancel a caller on hold
12
En
again.
Operation
Press .
Press and hold when a call is received.
Press the M.C. dial.
Press and hold .
Purpose
Adjust the volume of the
caller's voice (When private
mode is on, this function is not
available.)
Turn the privacy mode on or
off
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
to 6/ ), then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice
recognition is connected to the unit via Bluetooth.
1
Press and hold to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice
commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Operation
Turn the M.C. dial during the call.
Press BAND/ during the call.
to 6/ ).
.