Restoring The Machine's Default Lan Settings To Perform Setup Again - Canon PIXMA MP640 Handbuch

Restoring the Machine's Default LAN Settings to Perform Setup Again

Action
Follow the procedure below to restore LAN settings of the machine to the default state.
1
Use the Easy-Scroll Wheel to select Settings, then
press the OK button.
2
Select Device settings, then press the OK button.
3
Select LAN settings, then press the OK button.
4
Select Reset LAN settings, then press the OK button.
5
Select Yes, then press the OK button.
6
Make sure that the screen shown to the right appears.
• After a while, the LAN settings screen returns.
The LAN setting of the machine is now restored to the default state.
• Perform setup again by following the procedures in "Wireless Setup" on page 31 and onward or
"Wired Setup" on page 41 and onward in the printed manual: Getting Started.
<Default State>
Wireless connection Inactive
SSID BJNPSETUP
Data encryption Inactive
TCP/IP setting Obtain an IP address automatically
Wired connection Inactive
TCP/IP setting Obtain an IP address automatically