Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse-holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse-holder.
Step 3: Install the new fuse in the fuse-holder.
Step 4: Replace the fuse-holder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Number of DMX channels:
DMX-512 connection:
Sound-control:
Maximum ambient temperature T
Max. housing temperature T
Minimum distance from flammable surfaces:
Minimum distance to lighted object:
Fuse:
Flash-rate:
LED type:
Number of LEDs:
LED beam angle:
Color temperature:
Dimensions (LxWxH):
Weight:
Accessory:
Stake 45x210mm, 8mm hole
Please note: All information is subject to change without prior notice. 24.02.2015 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
100-240 V AC, 50/60 Hz ~
23 W
2
3-pin XLR
via built-in microphone
:
45° C
a
80° C
(steady state):
C
0.50 m
0.10 m
F 0.8 A, 250 V
0.8 – 8 Hz
50 W Array
1
120°
6768 K
140 x 285 x 250 mm
2.7 kg
No.
No. 51914702
16/16
00082002.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
