Hendi 2000 Gebrauchsanweisung Seite 8

• Temperature Mode: If you select the temperature mode, press the "Temperature Key"
the "Temperature key"
the required temperature by means of the arrow keys
the highest, temperature division is 5ºC.
• Timer setting: After programming the power or temperature, you can opt to programme the timer, this
timer switches the appliance off after the programmed time has been reached. You can do this by pressing
the "Timer key"
will be switched on.
EN
You can now set the desired time. The maximum programmable time is 180 minutes.
• From 0 - 10 minutes, the time adjusted interval is 1 minute for each increment and 30 seconds for each
decrement.
• From 10 - 60 minutes, the time adjusted interval is 5 minutes for each increment and 1 minute for each
decrement.
• From 60 - 180 minutes, the time adjusted interval is 10 minutes for each increment and 5 minutes for each
decrement.
• Switch OFF the appliance: Once you have reached the required result, you can switch off the appliance by
pressing the "ON/OFF key"
will go off.
8
will be switched on. Default Set Temperature is 100°C. Now you can programme
once after programming the power or temperature, the lighting of the "Timer key"
.The "Digital display"
& , the lowest temperature is 35ºC and 240ºC
will go off and the lighting of the control keys
, the lighting of