NZI Helmets CONVERT III Benutzerhandbuch Seite 9

Congratulations for purchasing this new NZI product. In order to enjoy the best features of this
helmet, we strongly recommend you to carefully read this instruction manual.
ADVISE HOW TO USE AND MAINTAIN YOUR HELMET
Take care of your helmet; it will protect you in case of impact. This helmet has been finished with
a thin paint coating. Just like any other painted surface, rough handling or carelessness when using
the helmet (like, for example, having the helmet fastened together with the lock) could damage
this coating. Do not modify the main helmet structure. Do not throw it on the floor, nor expose
your helmet to temperatures higher than 50 degrees Celsius, because, besides damaging the paint
coating, the level of protection of your helmet could decrease. Do not apply paints, self-adhesives,
combustibles or solvents on your helmet, the degree of protection may
diminish.
SIZE
!Never drive the vehicle with an opened chin-bar. Flip-
up helmets are not designed to sufficiently protect your
head with the chin-bar in the open position.
HELMET SIZE
It is important to choose the correct helmet size, so that it will protect
you adequately in case of an impact. The helmet size is determined by
the largest perimeter of the skull. Surround your head with a measure
tape, just above the eyes and ears, and you will obtain a measure in
centimetres. Choose a helmet that corresponds to this size, and if the
helmet is too tight, opt for a larger size. Please do not forget that the
helmet interior stretches when being used. If you hesitate between two
sizes, opt for the tightest one.
Fig.1
- 9 -
OWNERS MANUAL CONVERT III.indd 9 24/6/08 18:57:38