Philips SCD535 Bedienungsanleitung Seite 16

EngliSh
16
7 Set the desired maximum temperature with the + and - buttons.
8 Press the OK button to confirm.
The message 'Saved' appears on the display.
,
temperature alert on/off
Note: You can only switch the temperature alert on and off in the menu of the parent unit.
Note: If the temperature alert is activated too often, reduce the set minimum temperature and/or
increase the set maximum temperature (see 'Setting room temperature range').
If the temperature alert is switched on, the parent unit beeps if the actual room temperature
exceeds the set maximum temperature or drops below the set minimum temperature. In addition,
the backlight of the parent unit display goes on, the temperature alert symbol ( t) flashes and 'High'
or 'Low' appears on the display. If no minimum and maximum temperatures have been set, the
temperature alert is given when the room temperature drops below 14°C or rises above 35°C.
1 Select 'Temperature' with the + and - buttons.
2 Press the OK button to confirm.
3 Select 'Alert' with the + and - buttons.
4 Press the OK button to confirm.
5 If the alert is off, the display shows 'On?'. Press the OK button to switch on the alert. If the
alert is on, the display shows 'Off?'. Press the OK button to switch off the alert.
vibration alert on/off
Note: You can only switch the vibration alert on and off in the menu of the parent unit.
If the vibration alert is switched on, the parent unit vibrates as soon as the fourth sound level light
lights up while the volume is switched off.
1 Select 'Alert settings' with the + and - buttons.
2 Press the OK button to confirm.
3 Select 'Vibration' with the + and - buttons.
4 Press the OK button to confirm.
5 If the vibration alert is off, the display shows 'On?'. Press the OK button to switch on the
vibration alert. If the vibration alert is on, the display shows 'Off?'. Press the OK button to
switch off the vibration alert.
Setting display language
1 Select 'Settings' with the + and - buttons.
2 Press the OK button to confirm.
3 Select 'Language' with the + and - buttons.
4 Press the OK button to confirm.
5 Select the desired language with the + and - buttons.
6 Press the OK button to confirm.
Setting temperature scale
Note: You can only set the temperature scale in the menu of the parent unit.
You can set the temperature scale either to Celsius (C) or Fahrenheit (F).
1 Select 'Settings' with the + and - buttons.