Ideen Welt F-683D Bedienungsanleitung Seite 13

25. connect the mains plug to an easily reachable socket
so that the device can be quickly disconnected from the
mains supply in an emergency. use the mains plug like
a separator, which should be accessible at all times.
the device carries current as long as it is connected to
the mains. Pull the mains plug out of the socket in order
to disconnect the device completely.
26. Pull out the mains plug before cleaning, and if the
device is not being used.
27. move the device with extreme care as long as there is
still hot water in it. make sure that the kettle is switched
off before it is removed from the base station.
28. Dry the device and all parts before connecting it to the
power supply.
29. this device is intended exclusively for boiling water.
use this device only for its intended purpose.
Attention! Risk of burning!
The housing becomes very hot. Grasp the
device only by the handle (6).
Never open the lid (1) during the boiling
process or when there is hot water in the
kettle.
Hot steam escapes from the spout (13) during
use.
attention! use the kettle only with the original
corresponding base station (8).
Do not overfill the kettle, otherwise boiling
water may spurt out.
P170007_R4G_F-683D_Glass_Water_Kettle_6L_20170323.indd 13
13
t
23/3/2017 12:15 PM