Panel Description - PANCONTROL PAN 400 Bedienungsanleitung

and similar devices.
CAT III The device is designed for making measurements in building
installations. Examples are measurements on junction boards,
circuit breakers, wiring, switches, permanently installed
sockets, devices for industrial use as well as permanently
installed motors.
CAT IV The device is designed for making measurements at sources of
low voltage installations. Examples are meters and
measurements on primary overload protection devices and
ripple control devices.
DC voltage / current (IEC 60417-5031)
AC voltage / current (IEC 60417-5032)

5. Panel Description

1. Probe (Measurement device)
2. Probe
3. Display (LED's)
4. Test button 2x
(only PAN Volttester 400 FI)
EN 5