Using The Device; Adjusting The Air Supply - Aspire Nautilus 2 Bedienungsanleitung

Using the Device

34
Note for Cleaning
Use a dry cloth or cotton swab to clean the clearomizer.
Vaping
While holding the fire button of your e-cigarette, inhale the vapor
slowly and continuously through the mouthpiece of your Nautilus
2 clearomizer.

Adjusting the Air Supply

There is a airflow control ring located on the head base of the device.
It can be adjusted by turning and is adaptable to your vapor preferen-
ces. The more air flows through the device, the lower is the drawing
resistance. Pay particular attention to a sufficient air supply during
sub-ohm vaping.
Changing the Mouthpiece
The mouthpiece is inserted into the top of the clearomizer. Accordingly,
it can be removed by gently pulling up and once again attached by ap-
plying gentle pressure on clearomizer. The mouthpiece may be cleaned
with warm water. Make sure that it is completely dry before reinserting
into the clearomizer.