Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch GSS Professional 230 AE Originalbetriebsanleitung

OBJ_BUCH-426-005.book Page 13 Thursday, February 2, 2012 10:06 AM
16 Filter element (Microfilter System)*
17 Extraction adapter*
18 Vacuum hose*
19 Sanding sheet*
20 Perforating tool*
21 Screws for sanding plate
22 Sanding plate, thin, extended*

Technical Data

Orbital sander
Article number
Dust box included in delivery scope
Preselection of orbital stroke rate
Rated power input
No-load speed
No-load orbital stroke rate
Orbit diameter
Sanding sheet dimensions
— Adhesion via Velcro backing
— Attachment via clamping
Sanding plate dimensions
Weight according to
EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted sound pressure level of the product
is 76 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed 80 dB(A).
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =4.5 m/s , K=1.5 m/s .
h
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Bosch Power Tools
23 Sanding plate, extended*
24 Screws for extended sanding plate*
25 Triangular sanding sheet*
26 Triangular sanding plate, extended*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GSS ... 230 A 230 AE
0 601 ... 292 0.. 292 7..
– –
–
W 300 300
5500
-1
min 11000 – 11000
11000
-1
min 22000 – 22000
mm 2.4 2.4
mm 93 x 185 93 x 185
mm 93 x 230 93 x 230
mm 92 x 182 92 x 182
kg 2.3 2.3
/II /II
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with the fol-
lowing standards or standardization documents: EN 60745
according to the provisions of the directives 2011/65/EU,
2004/108/EC, 2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
12.01.2012
English | 13
230 AE 280 A 280 AE
292 6.. 293 0.. 293 7..
– –
–
300 330 330
5500 5500
– 11000 11000 – 11000
11000 11000
– 22000 22000 – 22000
2.4 2.4 2.4
93 x 185 115 x 230 115 x 230
93 x 230 115 x 280 115 x 280
92 x 182 114 x 226 114 x 226 114 x 226
2.3 2.6 2.6
/II /II /II
Dr. Eckerhard Strötgen
Engineering Director
PT/ESI
1 619 929 J37 | (2.2.12)
280 AE
293 6..
330
5500
– 11000
11000
– 22000
2.4
115 x 230
115 x 280
2.6
/II