Storing And Recalling Broadcast Frequencies; Switching The Rds Display; Receiving Pty Alarm Broadcasts; Introduction To Advanced Operations - Pioneer DEH-2120UB Bedienungsanleitung

Operating this unit
Storing and recalling broadcast
frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
! Six stations for each band can be stored in
memory.
% When you find a frequency that you
want to store in memory, press one of pre-
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.
Memorized radio station frequency can be re-
called by pressing the preset tuning button.
# You can also recall radio station frequencies
assigned to preset tuning numbers by pressing a
or b during the frequency display.

Switching the RDS display

RDS (radio data system) contains inaudible in-
formation that helps search for the radio sta-
tions.
% Press DISP/BACK/SCRL.
Press DISP/BACK/SCRL repeatedly to switch
between the following settings:
Program service name—PTY information—
Frequency
# PTY information and the frequency appear on
the display for eight seconds.
PTY list
Specific Type of program
NEWS News
AFFAIRS Current affairs
INFO
General information and advice
SPORT Sports
WEATHER Weather reports/meteorological infor-
mation
FINANCE
Stock market reports, commerce,
trading, etc.
POP MUS Popular music
ROCK MUS Contemporary modern music
EASY MUS
Easy listening music
OTH MUS
Non-categorized music
JAZZ Jazz
COUNTRY Country music
NAT MUS
National music
OLDIES Oldies, golden oldies
FOLK MUS Folk music
L. CLASS
Light classical music
CLASSIC
Classical music
EDUCATE Educational programs
DRAMA Radio plays and serials
CULTURE
National or regional culture
SCIENCE
Nature, science and technology
VARIED Light entertainment
CHILDREN Children's
SOCIAL
Social affairs
RELIGION
Religious affairs or services
PHONE IN Phone in
TOURING Travel programs; not for traffic an-
nouncements
LEISURE
Hobbies and recreational activities
DOCUMENT Documentaries

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts,
the unit receives it automatically (ALARM ap-
pears). When the broadcasting ends, the sys-
tem returns to the previous source.
! An emergency announcement can be can-
celed by pressing TA/AF.
You can also cancel an emergency an-
nouncement by pressing SRC/OFF,
BAND/ESC or MULTI-CONTROL.
Introduction to advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
function.
BSM (best stations memory)—REGION (regio-
nal)—LOCAL (local seek tuning)—TA (traffic
announcement standby)—AF (alternative fre-
quencies search)
Section
02
9
En