Herunterladen Inhalt Inhalt Diese Seite drucken

Adjusting Loudness; Adjusting Source Levels; Initial Settings; Adjusting Initial Settings - Pioneer DEH-2120UB Bedienungsanleitung

Cd rds-empfänger
Vorschau ausblenden Andere Handbücher für DEH-2120UB:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating this unit
1
Use MULTI-CONTROL to select
TONE CTRL in the audio function menu.
2
Press MULTI-CONTROL to display the
setting mode.
3
Press MULTI-CONTROL to select BASS/
MID/TREBLE.
4
Turn MULTI-CONTROL to adjust the
level.
+6 to –6 is displayed as the level is increased
or decreased.
5
Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been cancelled before
determination, operation is settled.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Use MULTI-CONTROL to select
LOUDNESS in the audio function menu.
2
Press MULTI-CONTROL to display the
setting mode.
3
Turn MULTI-CONTROL to select the de-
sired setting.
LOW (low)—HIGH (high)—OFF (off)
4
Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been cancelled before
determination, operation is settled.

Adjusting source levels

Source level adjustment (SLA) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM volume level,
which remains unchanged.
! The MW/LW volume level can also be ad-
justed with source level adjustments.
1
Compare the FM volume level with the
level of the source you wish to adjust.
2
Use MULTI-CONTROL to select SLA in
the audio function menu.
3
Press MULTI-CONTROL to display the
setting mode.
4
Turn MULTI-CONTROL to adjust the
source volume.
+4 to –4 is displayed as the source volume is
increased or decreased.
5
Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been cancelled before
determination, operation is settled.

Initial Settings

Adjusting initial settings

1
Press SRC/OFF and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
FM STEP appears in the display.
3
Turn MULTI-CONTROL to select one of
the initial settings.
FM STEP (FM tuning step)—AUTO-PI (auto PI
seek)—AUX (auxiliary input)—TITLE (multi
language)—PW SAVE (power saving)
# To return to the previous display, press
DISP/BACK/SCRL.
# To return to the main menu, press and hold
DISP/BACK/SCRL.
# To cancel initial settings, press BAND/ESC.

Setting the FM tuning step

Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
Section
02
17
En

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Deh-2100ub

Inhaltsverzeichnis