Storing And Recalling Broadcast Frequencies; Tuning In Strong Signals; Storing The Strongest Broadcast - Pioneer DEH-1400RB Bedienungsanleitung

Tuner
Storing and recalling broadcast
frequencies
If you press any of the
PRESET TUNING
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
When you find a frequency that you want to
store in memory press a
ton and hold until the preset number stops
flashing.
The number you have pressed will flash in the
indicator and then remain lit.
PRESET NUMBER
The selected radio station frequency has been
stored in memory.
The next time you press the same
button the radio station frequency is
ING
recalled from memory.
Notes
• Up to 12 FM stations, 6 for each of the two FM
bands, and 6 MW/LW stations can be stored
in memory.
• You can also use 5 and ∞ to recall radio sta-
tion frequencies assigned to
buttons.
buttons
but-
PRESET TUNING
PRESET TUN-
PRESET TUNING

Tuning in strong signals

Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
good reception.
1 Press to turn local seek tuning
LOCAL/BSM
on.
Local seek sensitivity (
LOC
play.
2 When you want to return to normal seek
tuning, press
LOCAL/BSM
tuning off.

Storing the strongest broadcast

frequencies
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast frequen-
cies under
PRESET TUNING
once stored there you can tune in to those fre-
quencies with the touch of a button.
Press and hold
LOCAL/BSM
seconds to turn on.
BSM
begins to flash. While
BSM
six strongest broadcast frequencies will be
stored under
PRESET TUNING
of their signal strength. When finished,
stops flashing.
• To cancel the storage process, press
LOCAL/BSM.
Note
• Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using
PRESET TUNING
) appears in the dis-
to turn local seek
buttons and
1–6
for about two
is flashing the
BSM
buttons in order
BSM
.
En
6