Troubleshooting Procedure - SLAT SON 24V 12A MS150 Bedienungsanleitung

The indicator light are not illuminated
•
Check the mains voltage (between 195Vac and 265Vac)
•
Check the primary fuse F1 on the power and control board
•
Check that the flat ribbon cable is correctly connected
The output indicator light is yellow
•
Check the output fuses F1 to F6
•
Check the auxiliary fuses F1 to F3
The battery indicator light is yellow
•
Check that the nominal battery voltage is ok with the sytem voltage
•
Check the polarity connections of each battery and on the rack battery connector
•
Check the battery connections and the battery fuse connections
•
Check the voltage of each battery block (>1,9V / >5,7V / >10,8V)
•
Check that the battery is approuved (see Pr 1.2.5)
•
If the mains is present, check that the output current is <12A
•
The internal battery resistor may be too high: replace the battery
The mains indicator light is yellow
•
Check the mains voltage (between 195Vac and 265Vac)
•
Check the primary fuse F1 on the power and control board
•
Check that cooling of the rack is sufficient and that the ambient temperature is < 45° C
For additional technical assistance, contact the SLAT hotline
or contact SLAT After-Sales Service to obtain an RMA (Return Material Authorisation) number.

8 Troubleshooting procedure

+ 33 (0) 4 78 66 63 70
For return requests, visit our website
http://www.slat.fr/formulaireRMA.php
Returns are not accepted without an RMA number.
35