Specifications - Monacor TFT-1904LED Bedienungsanleitung

gamma value (0, 1 or 2) with the button
and confirm the selection with the button
"MENU".
Reset All Setting (factory settings)
If the menu item Reset All Setting has been
selected, press the button "MENU": The mon-
itor is reset to the factory settings and the on-
screen menu is exited.
USB update (firmware update)
This menu item is not required for operation
and exclusively serves for updating the firm -
ware via the USB port (9) if a new firmware
version is available.
The last line of this menu only serves for infor-
mation and cannot be adjusted.
To return to the main menu level, press the but-
ton "SOURCE".
All rights reserved by MONACOR
manual may be reproduced in any form or by any means for any commercial use.

10 Specifications

or
Diagonal screen size: . 48 cm (19")
Maximum display
resolution: . . . . . . . . . . 1280 × 1024 pixels
Colour system: . . . . . . PAL / NTSC (auto)
Angle of view: . . . . . . . hor. 170°, vert. 160°
Response time: . . . . . 1.3 / 3.7 ms
Brightness: . . . . . . . . . 250 cd / m
Contrast ratio: . . . . . . . 1000 : 1
Colour display: . . . . . . 16.7 million colours
Inputs for the
signal sources: . . . . . . 1 × HDMI
Feed-through outputs
Video: . . . . . . . . . . . 2 × BNC
Audio: . . . . . . . . . . . 2 × RCA
Speaker: . . . . . . . . . . . 2 W
Power supply: . . . . . . . via supplied PSU con-
Ambient temperature: . 0 – 40 °C
Dimensions: . . . . . . . . 425 × 352 × 53 mm
Hole distance for
mounting the bracket: . VESA-100 standard
Weight: . . . . . . . . . . . . 3.7 kg (w/o base)
Subject to technical modification.
® INTERNATIONAL GmbH & Co. KG. No part of this instruction
2
TM
1 × DVI-D
1 × VGA
1 × S-Video
2 × BNC
2 × RCA
("AUDIO IN")
1 × 3.5 mm jack
("PC AUDIO IN")
nected to 230 V~ / 50 Hz
(w/o base)
(100 × 100 mm)
GB
13