Werbung
Verfügbare Sprachen
Verfügbare Sprachen
®
LCD Colour Monitor
GB
1
Operating Elements and Connections
1 Threaded jack for fixing the support via its mounting
screw (4)
2 Movable flat nut for fixing the support via its mount-
ing screw (4)
3 Mini DIN inline jack for connecting the supplied cable
4 Mounting screw for fastening the support to the
monitor, either to the threaded jack (1) or to the flat
nut (2)
5 Setscrew for the joint of the support, for adjusting the
inclination of the monitor
6 Power LED
7 POWER switch
8 Selector switch N/R for the picture display: normal or
mirror-inverted
9 Button FUNCTION for calling the on-screen menu
for the picture adjustments and for selecting the indi-
vidual menu functions
10 Selector switch VIDEO for the two signal sources
connected
11 Button VOLUME for calling the on-screen menu for
adjusting the volume
12 Buttons UP and DOWN, for making adjustments in
the on-screen menus
2
Safety Notes
This unit corresponds to the directive for electromag-
netic compatibility 89/336/EEC.
The unit is suitable for indoor use only. Protect it
against humidity and heat (admissible ambient tem-
perature range 0 – 40 °C).
The heat being generated within the unit must be car-
ried off by air circulation. Never cover the air vents on
the rear side.
For cleaning only use a dry, soft cloth; never use
chemicals or water.
No guarantee claims for the unit and no liability for any
resulting personal damage or material damage will be
accepted if the unit is used for other purposes than
originally intended, if it is not correctly connected,
operated or not repaired in an expert way.
If the unit is to be put out of operation definitively, take
it to a local recycling plant for a disposal which is not
harmful to the environment.
3
Applications
This LCD colour monitor in TFT active matrix technolo-
gy has been designed for connecting two audio/video
signal sources and offers a sharp and quick picture dis-
play which is rich in contrast. It is suitable for universal
TVLCD-568COL
LCD-TFT-MONITOR
12 V
/660 mA
‡
Serial - No. R 02/ . . . . . . . . . . . -01
1
2
3
®
Copyright
TVLCD-568COL
applications, e. g. in video surveillance systems or for
multimedia applications. For sound reproduction, a
small speaker has been integrated.
4
Setting up/Mounting
With the supplied support (fig. 2), the monitor can be set
up or fixed to a wall, but it can also be mounted on an-
other support provided with a 6.3 mm (
1) Screw the support to the monitor by means of the
mounting screw (4). According to the desired viewing
angle, either use the threaded jack (1) on the lower
side of the monitor or the flat nut (2) movable in the
guide rail.
2) To improve stability when setting up the support, it
can be rigidly mounted by means of the four supplied
screws or glued on by removing the foil on its lower
side.
For wall mounting, use the four supplied screws to
screw the stand onto the wall.
3) Release the lateral setscrew (5), adjust the desired
inclination of the monitor, then tighten the setscrew
again.
5
Connection
1) Connect the mini DIN plug of the supplied cable to
the inline jack (3) of the monitor cable.
2) It is possible to connect two signal sources (cameras,
DVD-players, etc.):
a Connect the yellow phono plug to the video output
and the red phono plug to the audio output of the
first signal source.
b Connect the black phono plug to the video output
and the white phono plug to the audio output of the
second signal source.
3) Connect a regulated 12 V power supply unit to the low
voltage inline jack of the cable. For connection, a plug
of the dimensions 5.5/2.1 mm (outside/inside diam-
eter) is required. The positive pole must be at the
centre contact.
6
Operation
1) Press the switch POWER (7) to switch on the unit.
The power LED (6) lights up and the monitor shortly
displays "PAL" and "VIDEO 1" or "VIDEO 2" (depend-
ing on the last signal source selected).
2) Use the button VIDEO (10) to switch between the two
signal sources connected.
Note: If there is no video signal from one of the sig-
nal sources connected, the sound of this signal
source will not be reproduced either.
3) Use the button FUNCTION (9) to call the on-screen
menu for the picture adjustments. The menu func-
tions can be selected one after the other with this but-
ton. The function currently selected is highlighted in
yellow.
©
by MONACOR INTERNATIONAL GmbH & Co. KG, Bremen, Germany. All rights reserved.
Order No.
19.9660
Sequence of functions:
CONTRAST
BRIGHT
COLOR
U/D (mirror-inverted dis play of the picture)
RESET
Approx. 3 s after the last actuation of a button, the
menu disappears.
1
/
") thread.
4
a To adjust contrast, brightness, and colour intensi-
ty, select the corresponding function and adjust
the desired value (min. 0 to max. 31) with the but-
tons UP and DOWN (12): To increase the value,
press the button UP, to decrease the value, press
the button DOWN.
b For a horizontal and vertical mirror-inverted display
of the picture, select the function U/D and press
the button UP: "REV" in the line is red and the pic-
ture is mirror-inverted. To cancel this function,
press the button DOWN: "NON" in the line is red
and the picture display returns to normal again.
c To reset all adjustments of this menu to the preset
values, select the function RESET and press the
button UP: "RST" in the line is red. After the menu
has disappeared or after the next menu function
has been selected, the adjustments will be reset.
4) Press the button VOLUME (11) to adjust the volume.
"VOLUME" is displayed. Use the buttons UP and
DOWN (12) to adjust the desired value (min. 0 to
max. 31).
menu disappears.
5) For vertical mirror-inverted display of the picture,
press the button N/R (8). To cancel this function,
press the button once again.
7
Specifications
Screen: . . . . . . . . . . . . . . TFT active matrix, diagonal
Colour system: . . . . . . . . PAL
Resolution: . . . . . . . . . . . hor. 960 x vert. 234 pixels
Video inputs:. . . . . . . . . . 1 Vpp/75 Ω
Audio inputs:. . . . . . . . . . 50 mV/10 kΩ
Audio output power: . . . . 0.5 W
Ambient temperature:. . . 0 – 40 °C
Power supply:. . . . . . . . . 12 V , 660 mA
Dimensions, weight: . . . . 155 x 135 x 35 mm, 470 g
According to the manufacturer.
Subject to technical modification.
6
5
4
Approx. 3 s after the last actuation of a button, the
screen size 14.2 cm (5.6")
MAX
7
8
9
10 11
POWER
N / R
FUNCTION
VIDEO VOLUME
POWER
POWER
N / R
FUNCTION
VIDEO
VOLUME
A-0239.99.01.06.2004
®
12
UP
DOWN
®
UP
DOWN
Werbung
