Charging The Battery - Renkforce 1577043 Bedienungsanleitung

7. Charging the battery

The USB port used to charge the battery must deliver a current of
at least 500 mA. This is normally the case for most computer USB
ports.
Fully charge the battery before using the camera for the first time.
A full charge takes approximately 3 hours.
Charge the battery regularly, even when you are not using the
camera (at least once per month). Failure to charge the battery
regularly may cause the battery to overdischarge, which can cause
permanent damage.
Ensure that the battery is aligned with the contacts in the battery
compartment.
• The rechargeable battery is located inside the battery compartment on the
bottom of the camera. To insert or remove the battery, press the small tab
on the battery compartment cover, and then remove the cover.
• Replace the cover after you have inserted the battery.
• Connect the USB cable to the USB input (7).
• Plug the other end of the USB cable into a USB port on a computer or a
suitable USB power supply.
• The charging indicator (10) will flash when the battery is charging and stay
constant once charging is complete.
• Unplug the USB cable when the battery has finished charging.
• A fully-charged battery will last for approximately 1.5 hours in 1080p re-
cording mode and 1 hour in 4K recording mode.
33