Preparation; Powering The Unit; Starting Up The Unit - Tascam DR-05 Bedienungsanleitung

5 Power supply status
When a battery is being used, a battery icon shows the
amount of battery power remaining in bars (
The battery is almost dead and the power will soon turn off
if the icon has no bars .
When using a TASCAM PS-P520E AC adapter (sold
separately) or USB bus power, appears.
6 Recorder operation status
This icon shows the recorder operation status.
Indicator Meaning
Stopped
8
Paused
9
Playing back
7
Searching forward
,
Searching backward
m
Skipping forward
/
Skipping backward
.
7 Level meter
These show the levels of the input and playback signals.
When the Monitor Mix function is ON, the level of the
combined input and playback sounds is shown.
8 File information
The file name or tag information of the file currently being
played back is shown.
9 Playback position
The current playback position is shown by a bar.
0 Elapsed time
Shows the elapsed time (hours: minutes: seconds) of the
currently playing track.
q Remaining time
Shows the remaining playback time of the current track
(hours: minutes: seconds).
w Peak value in decibels (dB)
The maximum level that occurs in a fixed period of time is
displayed digitally.
8
TASCAM DR-05
e Monitoring output
: Signal output from headphones
, , ).
: Signal output from the built-in speaker
r Playback area
This shows the current playback file area.
ALL
FOLDER
P.LIST
t Loop playback IN (starting) and OUT (ending) points
The set starting and ending points of the loop are shown.
When the IN point is set, the
corresponding position.
When the OUT point is set, the
corresponding position.
y Playback file number/total number of files
The total number of files in the playback area and the
number of the current file are shown.
All files in the MUSIC folder
All files in the selected folder
All files added to the playlist
icon appears at the
icon appears at the

Preparation

Powering the unit

8 Using AA batteries
1.
Slide open the battery compartment cover on the back of
the unit.
2.
Install 2 AA batteries with their ¥ and ^ marks as shown
in the battery compartment .
3.
Close the battery compartment cover.
i Use the BATTERY TYPE item of the SYSTEM menu to set
the type of battery in order to accurately show the amount
of power remaining and allow the unit to accurately
determine whether enough power is available for proper
operation. (By default, this is set to "ALKAL" for alkaline
batteries.)

Starting up the unit

Press and hold the ¤(HOME) [8] button until TASCAM
DR-05 (start-up screen) appears.
The Home Screen appears when the unit starts up.