Safety Notes; Functional Description; Intended Use - Bosch DLE 70 Professional Originalbetriebsanleitung

OBJ_BUCH-703-002.book Page 18 Wednesday, July 23, 2008 3:15 PM
18 | English

Safety Notes

en
Working safely with the measuring
tool is possible only when the op-
erating and safety information are
read completely and the instruc-
tions contained therein are strictly
followed. Never make warning labels on the
measuring tool unrecognisable. SAVE THESE
INSTRUCTIONS.
Caution – The use of other operating or
adjusting equipment or the application of
other processing methods than those
mentioned here, can lead to dangerous
radiation exposure.
The measuring tool is delivered with a warn-
ing label in German language (marked with
the number 9 in the representation of the
measuring tool on the graphic page).
IEC 60825-1:07
<1 mW, 635 nm
Before putting into operation for the first
time, attach the supplied sticker in your
national language over the German text on
the warning label.
Do not direct the laser beam at persons or
animals and do not stare into the laser beam
yourself. This measuring tool produces
laser class 2 laser radiation according to
IEC 60825-1. This can lead to persons being
blinded.
1 609 929 R53 | (23.7.08)
Do not use the laser viewing glasses as safe-
ty goggles. The laser viewing glasses are
used for improved visualisation of the laser
beam, but they do not protect against laser
radiation.
Do not use the laser viewing glasses as sun
glasses or in traffic. The laser viewing glass-
es do not afford complete UV protection and
reduce colour perception.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of
the measuring tool is maintained.
Do not allow children to use the laser meas-
uring tool without supervision. They could
unintentionally blind other persons or them-
selves.
Keep the positioning pin 15 away from
"live" wires or parts. There is a risk of elec-
tric shock.

Functional Description

Please unfold the fold-out page with the repre-
sentation of the measuring tool and leave it un-
folded while reading the operating instructions.

Intended Use

The measuring tool is intended for measuring
distances, lengths, heights, clearances and for
calculating areas and volumes. The measuring
tool is suitable for interior and exterior con-
struction site measuring.
Bosch Power Tools