Using The "Knead" Programme - Thermogourmet KA-6526 Gebrauchsanleitung

• You can also start the device if only the motor speed has been set. In this
case, the device operates for 20 minutes and then stops automatically.
11. Push the Start/Stop button to start the device. The device will start operating and
the set cooking time will begin to count down. If only a motor speed has been set,
the cooking time will count up.
If you have selected a cooking time, cooking temperature and motor speed
before starting, you can adjust the values at any time during the cooking
process. Please keep in mind that you cannot set the motor speed to 0 in
the process!
12. The device will turn off and beep ten times once the cooking time has elapsed.
13. To turn off the device, set the On/Off switch to the O position and then pull the mains
plug out of the socket.

Using the "Knead" programme

1. Connect the device to a properly installed, easily accessible socket and set the On/
Off switch to position I. 00 : 00 will appear on the top line of the display (display in-
dicating the cooking time) and 0 for the specifi cation of the cooking time or 0 for the
specifi cation of the motor speed in the lines below.
2. Press the Kneten button (knead). The cooking temperature is automatically set to
0 °C and the motor speed to 3. The displays shows the symbol
Motor speed and cooking temperature cannot be changed in the "Knead"
programme. Only the preparation time can be set.
3. Preparation time: Press the Zeit button (time) once. The minutes display fl ashes. You
can now set the minutes with the + and - buttons. By pressing the button once, the
minute display is increased or decreased by 1 minute. Press the Zeit button (time)
a second time. The seconds display fl ashes. You can now set the seconds with the
+ and - buttons. By pressing the button once, the second display is increased or de-
creased by 1 second. The maximum preparation time that can be set is 90 minutes.
You can start the "Knead" programme without setting the preparation time. In
this case the appliance operates for 20 minutes and then stops automatically.
4. Start the appliance with the START/STOP button. The appliance starts working for 3
seconds and stopping for 4 seconds. The preparation time that was set, starts count-
ing down. If no preparation time was set, the preparation time counts up.
• When the appliance operates in the "Knead" programme, you can change
the preparation time at any time. By pressing the Kneten button (knead)
again, the "Knead" programme is aborted and the symbol
pears.
• If the appliance was started with manually set values for preparation time,
cooking temperature and motor speed, then the "Knead" programme can
no longer be activated. The Kneten button (knead) is then deactivated.
5. After expiry of the set preparation time the appliance automatically stops. If no prepa-
ration time was set before starting, the appliance automatically stops after 20 min-
utes. In both cases the appliance beeps ten times and the symbol
display disappears.
06334_DE-GB-FR-NL_V0.indb 35 06334_DE-GB-FR-NL_V0.indb 35
35
.
disap-
in the
06.08.2014 10:49:30 06.08.2014 10:49:30