Solamagic S3 Montage- Und Gebrauchsanleitung Seite 24

Step 3: Installing the heater on the wall mounting
• Push the securing lugs (3) with the ring (4) from the left side into the dovetail
groove for approx. 530 mm and 130 mm.
• Tighten each screw 3,5x6,5 (5).
• Mount the heater (B) in the adapter claws (6).
• Use a 5 mm Allen key to tighten the eccentric tensioner (7)in a clockwise direc-
tion; each adapter claw must be firmly connected to the heater and free from
play.
• Fit each ring (4) of the securing lug into the cutout (A)
• To set or adjust the direction of radiation, use a 5 mm Allen key to loosen
the screws (11), shift the heater into the required direction and re-tighten the
screws (11).
08/2016
11 6 B
7 3,4,5
24
A