Section 2: Installation; Tools Required; Unpacking The Fireplace; Parts And Hardware - Livin Flame Newton Montageanleitung Und Gebrauchsanweisung

SECTION 2: INSTALLATION

2.1 Tools required

Magnetic Screw Driver
Rotary Hammer
2.2

Unpacking the Fireplace

WARNING! Do NOT use this appliance if any part has been under water. Immediately call
Open the packaging carefully and remove the foam.
Remove and discard the plastic bag.
Be responsible when handling the packing materials.
Keep the original packaging for future transport and/or storage.
Check all accessories are got before you keep the packing.

2.3 Parts and Hardware

Necessarily needed Parts and Hardware
Firebox ( 1pc )
Remote Control ( 1pc )
a qualified service technician to inspect and to replace any part of the electrical
system if necessary.
Keep plastic wrapping away from children.
ST4x8 Machine Screws
Front Glass Panel ( 1pc )
( 2pcs )
Battery ( 2pcs )
13
White Stones ( set )
Clear Faux Stones ( set )