Operation; Time Setting; Temperature Setting - Vigan IV1Z Bedienungsanleitung

OPERATION

Unpack the appliance from the box and make sure that the packaging material do not get into the
hands of children (plastic bags might cause suffocation). Find the suitable place for the appliance
according to safety instructions described in this instruction manual. After placing the appliance on
suitable spot, plug the power cord into the power socket. Before plugging the power cord, compare
the data displayed on rating label with the parameters of your electrical network. These data must
match! After plugging it, there will be an audible notification. Pick suitable utensil with the prepared
dish, place it on the cooking zone and press ON/OFF button (number 7). If the display announces E0,
it means that the placed utensil is not suitable or there is not utensil at all.
POWER SETTING
After turning the induction cooker on and placing the suitable utensil, press function button (number
6). The red indicator light will turn on above the POWER sign (number 3). The induction cooker has
pre-set power outputs of 1200W (left cooking zone + model IV1Z) or 1000W (right cooking zone of
model IV2Z). The power can be set with +/- buttons. The power range is 500-2000W (left cooking zone
+ IV1Z) and 500-1500W (right cooking zone). The appliance will remain in this setting until turned
off. If the power will be set to lowest level (500W) and you will press - button (number 2) again, the
appliance will automatically switch into the stand-by zone.

TIME SETTING

After setting the power output, press the function button again (number 6) and the light indicator
will change to time function (number 5). Time is pre-set to 0, which means that the cooker will work
continuously until turned off. You can set the desired time with +/- buttons (number 2). The range of
time setting is 0-180 minutes. The lowest possible set time is 5 minutes. After choosing the desired
time setting, don't press the function button again, it would cause the timer reset. With the time set,
the display will automatically switch between temperature and power. After the time expires, the
appliance will automatically switch into the stand-by mode.

TEMPERATURE SETTING

After setting the power, press the function button three times (number 6). The indication light will
appear above temperature (TEMP). The temperature is pre-set to 240°C. Choose desired temperature
with +/- buttons. The cooker has adjustable temperature from 60 - 240°C with 20°C levels. If the cooker
is set to lowest temperature level (60°C) and you will press – button, the cooker will automatically switch
into stand-by mode.
MIN AND MAX BUTTONS
These buttons serve for setting the minimal and maximal power only!
24
str