Impressa Xj5; Selecting Emptying Mode; Changing The Water - Jura IMPRESSA XJ5 Bedienungsanleitung

2 Operating the IMPRESSA with the fresh water kit

IMPRESSA XJ5

Selecting emptying mode

Changing the water

42
In the programme item
KIT MODE
settings:
U
AUTOMATIC
U
The water tank is emptied automatically every time the
IMPRESSA is switched off.
U
PROMPT
U
When the IMPRESSA is switched off the user is prompted to
decide whether to empty the water tank or not. This prompt
must be acknowledged.
U
NEVER
U
The water tank is never emptied when the IMPRESSA is
switched off.
Example: Proceed as follows to empty the water tank automatically
every time the machine is switched off.
Precondition:
is displayed.
READY
k T Press and hold the Rotary Switch until
appears.
MAINTENA.
g T Turn the Rotary Switch until the programme item
is displayed.
MODE
k T Press the Rotary Switch.
NEVER
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
appears briefly on the display.
OK
KIT MODE
g T Turn the Rotary Switch until
k T Press the Rotary Switch to exit programming mode.
READY
You can initiate a water change manually at any time.
Precondition: is displayed.
READY
k T Press and hold the Rotary Switch until
appears.
MAINTENA.
you can make the following
MAINTENA.
is displayed.
AUTOMATIC
is displayed.
EXIT
MAINTENA.
KIT