Switching Off; Descaling The Machine - Jura IMPRESSA XJ5 Bedienungsanleitung

Switching off

Descaling the machine

J CAUTION
CAUTION
CAUTION
2 Operating the IMPRESSA with the fresh water kit
If, in 'Machine settings (5/6)'
'Always prompt', the switch-off process for your IMPRESSA will be
slightly different.
T Place one receptacle under the coffee spout and another
under the cappuccino frother.
Q T Press the On/Off button.
'Empty water tank'
T Press 'Yes'.
E If the water tank is not emptied, press the
'Machine is rinsing.',
spouts used to prepare a speciality coffee or milk are rinsed.
The operation stops automatically.
'Water tank emptying', the water tank is emptied. The oper-
ation stops automatically. The IMPRESSA is switched off.
E When the IMPRESSA is switched off with the On/Off button,
the machine consumes less than 0.1 W of standby energy. The
machine can be completely disconnected from the power
supply using the power switch.
The IMPRESSA builds up deposits of limescale over time and auto-
matically prompts you to descale it when necessary. The degree of
calcification depends on the hardness of your water.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
/ 'Empty water tank', you selected
/ 'Empty water tank now?'.
'' button.
'Milk system is being
de
en
fr
rinsed.'. The
it
nl
es
pt
sv
ru
39