System Filling; Operating The Impressa With The Fresh Water Kit; Impressa Xj9; Selecting Emptying Mode - Jura IMPRESSA XJ5 Bedienungsanleitung

2 Operating the IMPRESSA with the fresh water kit

IMPRESSA XJ9

Selecting emptying mode

2 Operating the IMPRESSA with the fresh water kit
g T Turn the Rotary Switch to set the desired water hardness.
k T Press the Rotary Switch to confirm the setting.
appears briefly on the display.
OK
HEATING
T Place one receptacle under the coffee spout and another
under the hot-water nozzle.

SYSTEM FILLING

flows out of the hot-water nozzle. The operation stops auto-
matically.
HEATING
appears on the display. The IMPRESSA is now ready
READY
for use.
Once you have installed the intelligent fresh water kit in the
IMPRESSA, new programme items will be displayed in program-
ming mode. There are also changes to two sections in the instruc-
tions for use for the IMPRESSA:
U
Chapter 3: 'Daily operation – Switching off'
U
Chapter 5: 'Maintenance – Descaling the machine'
The changes to the instructions are explained below (for the
IMPRESSA XJ9 and XJ5).
In 'Machine settings (5/6)'
lowing settings:
U
'Always'
U
The water tank is emptied automatically every time the
IMPRESSA is switched off.
U
'Always prompt'
U
When the IMPRESSA is switched off the user is prompted to
decide whether to empty the water tank or not. This prompt
must be acknowledged.
U
'Never'
U
The water tank is never emptied when the IMPRESSA is
switched off.
, the system fills up with water. Water
/ 'Empty water tank' you can make the fol-
de
en
fr
it
nl
es
pt
sv
ru
37