VISUAL TruView Installations- Und Einrichtungsanleitung Seite 7

Open a Web browser and enter the default IP address of the
a
Visual TruView server followed by :8000/tvadmin.
For example: http://192.168.0.100:8000/tvadmin
The TruView Appliance System Administration Login screen is
displayed.
Enter the username and password. Then, click
b
The default username is TVadmin. The default password is
tv.
Select the Appliance tab.
c
Click
d
If desired, change the hostname of the appliance. Click
e
In the New hostname box, enter a name and click
Set an IP address for the primary and for the secondary DNS
f
server. Click
Configure the management port's IP address settings. Click
g
address settings (static IP is highly recommended). Then, click
Close the Web browser.
h
Disconnect the laptop from the appliance.
i
Use an ethernet cable and connect the Gb1port of the Visual
j
TruView server to your network switch.
From a remote PC, open the Remote Desktop Connection
10
application.
Enter the IP address of the Visual TruView server and click
11
Connect.
Enter the username and password. Then, click OK.
12
The default username is vuptime. The default password is
Visual1.
Set the Windows date, time, and time zone. Select the time zone
13
where the Visual TruView server is located. Double-click the
Windows clock in the notification area to open it.
If the Windows clock is not there, right-click Start, and select
Properties. Select the Taskbar tab and enable Show the
Clock.
Close the Remote Desktop application.
14
4
Network Settings.
.
. On the Network Interface screen, configure the
.
.
.
.