Frequently Asked Questions - Visual Truview Installations- Und Einrichtungsanleitung

Where to Go Next
After installing and setting up the Visual TruView server, consult the
TruView Server Administration Guide and the online Help for
instructions on managing the server and client connections. You can
find this guide (and other TruView documentation) on your local drive.
Select Start > Programs > Fluke Networks > TruView
Manuals.
You can also find the most current versions of TruView documentation
at www.flukenetworks.com.

Frequently Asked Questions

Why can I not connect to the Visual TruView server from a remote PC?
Connection to the Visual TruView server may be blocked by a firewall
or access list.
Make sure that the remote PC is inside the firewall or is connected to
the network using a VPN. The firewall should allow Web connections
to the Visual TruView server through TCP port 80. (For access to the
TruView Web Client or TruView Tracker UI, you must open TCP port
8000.) Use the PING or Tracert utilities to determine where the path
to the Visual TruView server may be blocked. Contact your network
administrator to change the configuration to allow TCP port 80
connections to the Visual TruView server from your location.
How Do I Rename My Server?
Instructions for renaming the Visual TruView server are given in the
TruView Server Administration Guide.
13